Best Arc TIG Welder – Reviews & Buying Guide (2024)

Disclaimer: We support our readers with industry knowledge & research. You support us through our carefully chosen products with links that may earn us a commission.

You have so much metal stuff to repair, and you are worried about how can you do so? For sure, you will need an arc welder, but how to choose the best one, as there is a huge variety at the marketplace. Now you don’t have to worry; our article will help you choose the best arc tig welder.

We can understand how much you are a handyman at home, and everywhere you go. However, a good handyman always needs his power tools to conquer any task given.

So now there is no need to worry at all, as with our guide you will be thanking us later.

Without further ado, let’s have a look over 5 of the top-rated arc tig welder.

Image	Product	Feature
	LOTOS TIG200ACDC 200A AC/DC Aluminum Tig Welder	If you ever want an arc tig welder with exceptional welding properties and a robust motor, this might be the perfect option for you.
	Tig Welder, HF TIG/Stick/Arc TIG Welder	You can use the S7 200 AMP on a variety of metals, steels, and alloys. Moreover, it’s a two-in-one tool that combines a tig torch.
	Amico ARC-160, Arc Lift-TIG Welding Machine	Did you know that in Italian, the word “amigo” means “friend”? Amico is a terrific companion to have if you’re a professional welder.
	Weldpro 200 Amp Inverter Multi Process	Where some of the best welders are getting mentioned, how can we forget the weld-pro? This welder can perform heavy-duty welding as well as is compact too.
	PrimeWeld Pilot Arc 50A Plasma Cutter	This welder has been able to take the award for one of the best welders to give some of the fastest welds.

1. LOTOS TIG200ACDC 200A AC/DC Aluminum Tig Welder

If you ever want an arc tig welder with exceptional welding properties and a robust motor, this might be the perfect option for you. with the efficient working power and a strong build-up, you will want to own one of these.

 Key Features 

The major function you are getting with the Lotos TIG200 is the conversion between 110 and 220 volts. Moreover, you will get to have the option of working on both 110V and 220V 50/60Hz.

Besides, you are going to have a dual-frequency of 50Hz/60Hz with this exceptional welder. Furthermore, you do not need to be concerned if you are unsure about which energy is correct.

For your convenience, this welder equipment detects the requirement for voltage modification automatically.

Also, this robust welder uses a novel technique known as a “Square Wave Inverter.” To your surprise, it is the best tig welder for aluminum to weld most of the aluminum available.

Moreover, you can also easily weld alloy steel, stainless steel, and copper with it.

In addition, you can use the Lotos for both TIG and ARC/Stick welding tasks. You can use it to fuse metals that are up to 3/8 inches thick. If you want to start the HP of the Tig welder, you can do it with a hand torch and a foot pedal.

Besides, you can also use the foot pedal to alter the welder’s temperature.

 Why Do We Choose This Product? 

If you need a welder that can perform various tasks, the Lotos TIG 200 AC DC is a fantastic choice. If you are a professional welder, then you will benefit from it. It’s a user-friendly tool for both beginners and experts.

2. Tig Welder, HF TIG/Stick/Arc TIG Welder

You can use the S7 200 AMP on a variety of metals, steels, and alloys. Moreover, it’s a two-in-one tool that combines a tig torch, an earth clamp, and an electrode holder.

With this welder, you are going to have a high welding speed without compromising welding quality.

 Key Features 

For your information, the S7 Arc 200 is the lightest TIG welder on our list, weighing only 3.3 kilograms. Besides, you can easily pick it up to transport it to any part of your workplace or home.

Also, the energy-saving design helps you save money on your electricity costs without reducing the machine’s quality of performance.

Additionally, you will also receive the necessary accessories to boost the machine’s performance when you purchase this welder. You can get this best tig welder under 500 dollars.

Besides, the instructions, like the machine’s user interface, are straightforward; you don’t have to do any technical stuff.

For the machine heating issues, you never have to worry. Suppose you look attentively, some extra vents that you can find right below the main dial on the front display.

These are meant to assist the machine is cooling down more quickly once you’ve finished working.

Moreover, the machine is compact, and you can use it for your DIY project or some professional work. You will be much more comfortable knowing that the machine is made while taking extra care to help retain its efficiency.

 Why Do We Choose This Product? 

It is a “thumbs up” welder that not only welds a range of metals, including stainless steel, alloy steel, mild steel, copper, cast iron, and chrome.

Moreover, you are getting the best equipment with exceptional welding performance and strong build-up altogether at once.

3. Amico ARC-160, Arc Lift-TIG Welding Machine

Did you know that in Italian, the word “amigo” means “friend”? Amico is a terrific companion to have if you’re a professional welder or an amateur welding hobbyist. Let’s have a look over one of its fantastic welders.

 Key Features 

Amico is the welder for you if you need something small and portable. The Amico 160-amp DC stick welder is lightweight and portable so that you can carry it easily from one location to another.

One of the many reasons why you would adore the Amico stick welding equipment is its inverter design. Additionally, the size, efficiency, stability, and cost are only a few of the advantages of this design.

Moreover, by default, inverter welders are much smaller than normal arc welders. To top it off, you can weld twice as much as in the same amount of time, and their stability will be higher as well.

However, to surprise you, inverter welders, despite their higher initial cost, consume less energy and are far more cost-effective. Additionally, the Amico 160 is exceptional, with a duty cycle of 60 percent at full 160 amps.

Furthermore, the Amico’s 160-amp DC stick has a nice LED display. It does seem fantastic, but how is it even really useful? The LED display is more visible for starters than normal digital controls, making it easier to use.

 Why Do We Choose This Product? 

If you ever want a welder that will never compromise the welding quality yet is affordable, this welder will do wonders for you. Moreover, if you are a beginner, you would perfectly get along with this welder’s friendly interface.

4. Weldpro 200 Amp Inverter Multi Process

Where some of the best welders are getting mentioned, how can we forget the weld-pro? This welder can perform heavy-duty welding as well as is compact too. You will be at complete ease while having one of these.

 Key Features 

The design and accompanying controls are quite intuitive for the time being, making it easy for you to go from one process to another. Moreover, it is considered to be a beginner-friendly model.

With a two-hundred-and-thirty-volt amperage range, you will have a lot of punch with this model. Moreover, it has a range of forty to two hundred amps for MIG, and the TIG welding has a power range of fifteen to two hundred amps.

Additionally, you will benefit from a duty cycle of 30% at 200 amps. Also, the digital display on the welding equipment is large and bright, making it easy for you to read even under dim or strong lighting.

This model is a good choice for you if you are a beginner because you can change or read the amp rating and wire-speed using the display screen. Besides, you can also have a look over VRD’s high temperature on display.

You can also see the wire speed and set the amperage for repeat welds on display. If you have the optional spool gun, this welding machine can handle any weld, including aluminum.

 Why Do We Choose This Product? 

You can’t match such a multifunctional model at this price, especially one that comes in a robust, compact design that’s also very portable. The adaptability of this machine, though, is where it shines.

5. PrimeWeld Pilot Arc 50A Plasma Cutter

This welder has been able to take the award for one of the best welders to give some of the fastest welds. Moreover, it has a premium build with robust machinery, giving you a full efficient machine to work.

 Key Features 

With the PrimeWeld Cut50D Plasma Cutter, you will have the capability of 50 amps and can cut up to 1/2-inch steel.

Moreover, you can scale back to 15 amps with the wide amperage range, which is low enough to cut auto body sheet metal while being careful.

Also, it has dual 120/240-volt input power and comes with a 120-volt home plug connection adapter. You can start this welder with a drag torch arc. To cut, you have to touch the surface, wait for a second, then drag.

Additionally, the torch connection is a substantial 12.5 feet long, with a protective covering, so you will never worry about any spark damage.

Lastly, it’s a fantastic deal to get a pocket-friendly machine with such astounding features having this much power altogether.

 Why Do We Choose This Product? 

If you want a sturdy design for heavy-duty welding with an efficient motor, this welder can be the best option for you, and you will thank us later.

How to Choose The Best Arc Tig Welder

Buying the best arc tig welder can be a tiresome duty. However, with the below points, you can have it all at ease.

• Determine whether you’ll need a 110V, 240V, or 415V power source. Consider how much power you have at your disposal, whether it’s in your house or your workshop.
• Consider the machine’s duty cycle!! Unless you make extremely short welds, it’s advisable to choose a machine with a duty cycle of 35 percent.
• Consider any future chances that your welder may provide, which may necessitate more power or amperage. You don’t want to spend a lot of money to find out a year later that it no longer meets your demands.
• Is the machine made in your country, and are replacement parts available? We frequently hear from users who cannot obtain spare parts for their machines when they break down.